Convoy M3-C Portable 26650 Flashlight

• Material:  Aluminum Alloy
• Lens type:  ar-coated glass
• Reflector: Orange peel for XHP70.3 HI / GT FC40 / LHP73B / SFT70 ; Smooth for SFT40 / W5050SQ5
• Driver output: 6V 5A for XHP70.3 HI / SFT70; 12V 2.5A for GT FC40 ; 3V 8A for SFT40 / W5050SQ5; 3V 20A for LHP73B; 
• Recharging current: max 2A
• Reverse Charge Current: 2A
• Low voltage warning:  Yes
• Reverse polarity protection:  Yes
• Temperature control function: Yes, As the temperature rises, the current will drop slowly, but this does not mean that the surface of the flashlight will not heat up.
• Mode memory: Yes
• Tailstand:  Yes
• Battery included:  No
• Required battery type:  IMR26650 or IMR18650 (The continuous discharge current is greater than 10A)
• Required battery quantity: 1pcs
• Height:  149mm
• Diameter(head/body/tail):  48.1mm/35.6mm/38.1mm
• Weight: 290g

  Mode operation instructions(Excluding LHP73B): 1.click the button  ——>  flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down 2.flashlight off, press the button  ——>  moonlight mode  (0.2%)   [This brightness will not be remembered] 3.flashlight on or off, 2-click the button  ——>  turbo 100% 4.flashlight off,3-click the button   ——>  strobe 5.flashlight off,4-click the button   ——>  tactical mode, only 100% ,4-click the button again to quit tactical mode. 6.flashlight off,5-click the button   ——>  voltage detection  (* means "flash" ,  *** pause ******* means 3.7V, ) 7.flashlight off,6-click the button   ——>  normal ramping mode switch to 4modes 1%-10%-40%-100% 8.flashlight off,10-click the button   ——>  Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.   The flashlight has low voltage protection and temperature control protection.

Mode operation instructions for LHP73B: • Press the button → The flashlight turns on at the last memorized brightness → Hold the button to gradually increase brightness → Release, then hold the button again to gradually decrease brightness
• When the flashlight is off, press and hold the button → Moonlight mode (this brightness level can not be memorized)
• Whether the flashlight is on or off, double-click the button → 10A brightness mode
• Whether the flashlight is on or off, double-click and hold the button → 20A brightness mode (after releasing the button, it returns to the previous brightness level or turns off)
• When the flashlight is off, triple-click the button → Strobe mode
• When the flashlight is off, quadruple-click the button → Tactical mode, 20A; quadruple-click again to exit Tactical mode
• When the flashlight is off, quintuple-click the button → Voltage check (“” indicates flashes, “** pause *******” indicates a voltage of 3.7V)
• When the flashlight is off, six-click the button → Switch to stepped brightness mode: four brightness levels, maximum current 10A
• When the flashlight is off, ten-click the button → Lockout mode; under any operation the flashlight will blink once to indicate it is locked. Ten-click again to exit Lockout mode. Note: This is the only way to unlock.
• The flashlight features low-voltage protection and temperature control protection.